impermax
JK Poolcleaning introduces Impermax
make with this product your roof or swimmingpool waterproof
REVOLUTIONARY DEVELOPMENT FOR THE PROFESSIONAL POND CONSTRUCTOR!
It was never easier to build a pond with this new, 400% elastic, waterproof membrane which is also drinking-water approved. Directly applicable to damp-proof plastered floors and walls or, in combination with a geotextile underground, to be used directly in the soil. Impermax has to be applied in two layers of contrasting colours to secure a good seal. Application: product must be applied in quantities up to 2 kg/m2, resulting in a membrane thickness of 1.4 to 1.9 mm.
PRODUCT OVERVIEW: IMPERMAX is a new single component, high performance waterproofing material, based on Polyurethane, certified according to EEC Directive 98/83/CE, and which can be in direct contact with drinking water for human consumption. It can be easily applied on different kinds of surfaces used in hydraulic infrastructures such as concrete, mortar, ceramics, fibreglass reinforced polyester, etc). Curing time: 4-6 hours (in the summer), 12-24 hours (in the winter). Not suited for PP or PE.
ADVANTAGES:
- Economic and easy to apply, it delivers a jointless continuous embrane which totally adapts to the surfaces to be protected.
- Extreme mechanical and chemical properties.
- Certified according to EEC Directive 98/83/CE, so it can be in direct contact with drinking water for human consumption.
- This membrane can easily be applied in spots which are difficult to access with other systems.
- It is easy to obtain uniform thicknesses combining the product with GEOMAX and our THIXOTROPY AGENT, even in extremely steep or even vertical areas (see data sheet for these materials).
- IMPERMAX AQUA can be applied even in case of low temperatures and high relative humidities, obtaining very short cure times in combination with our PUR CAT additive (see data sheet).
- Product does not require any blends or special primers (it is a one component product).
IMPERMAX LIQUID POND LINER
REVOLUTIONARY DEVELOPMENT FOR THE PROFESSIONAL POND CONSTRUCTOR!
It was never easier to build a pond with this new, 400% elastic, waterproof membrane which is also drinking-water approved. Directly
applicable to damp-proof plastered floors and walls or, in combination with a geotextile underground, to be used directly in the soil.
Impermax has to be applied in two layers of contrasting colours to secure a good seal. Application: product must be applied in quantities
up to 2 kg/m2, resulting in a membrane thickness of 1.4 to 1.9 mm.
PRODUCT OVERVIEW: IMPERMAX is a new single component, high performance waterproofing material, based on Polyurethane,
certified according to EEC Directive 98/83/CE, and which can be in direct contact with drinking water for human consumption. It can be
easily applied on different kinds of surfaces used in hydraulic infrastructures such as concrete, mortar, ceramics, fibreglass reinforced
polyester, etc). Curing time: 4-6 hours (in the summer), 12-24 hours (in the winter). Not suited for PP or PE.
ADVANTAGES:
- Economic and easy to apply, it delivers a jointless continuous membrane which totally adapts to the surfaces to be protected.
- Extreme mechanical and chemical properties.
- Certified according to EEC Directive 98/83/CE, so it can be in direct contact with drinking water for human consumption.
- This membrane can easily be applied in spots which are difficult to access with other systems.
- It is easy to obtain uniform thicknesses combining the product with GEOMAX and our THIXOTROPY AGENT, even in extremely
steep or even vertical areas (see data sheet for these materials).
- IMPERMAX AQUA can be applied even in case of low temperatures and high relative humidities, obtaining very short cure times in
combination with our PUR CAT additive (see data sheet).
- Product does not require any blends or special primers (it is a one component product).
Contact information
J.K. Poolcleaning s.l.
Vistas del Mar 8-4
35660 Corralejo
T: 626 826 149
E: sales@jk-poolcleaning.info